December 6, 2007 10:30 AM PST

Start-up creates flexible sheets of light

  • Print
Start-up creates flexible sheets of light
Related Stories

Still waiting for OLED TVs

August 21, 2007

Bright future for OLEDs, report predicts

February 15, 2007

Tripping the lights organic

September 5, 2006
SAN FRANCISCO--Let there be light on the side of municipal buses.

That's the motto of CeeLite, a Blue Bell, Pa.-based start-up that has devised a thin, bendable light source that can be integrated into walls or wrapped around poles. The company is in the midst of trials with 32 cities, which are putting signs equipped with CeeLite's light on the sides of its buses.

The signs, which require only about 4 watts of power per square foot, can measure up to 12 feet long and 30 inches high, but they are less than an inch thick. The actual light source inside the signs is only about an eighth of an inch thick, but it can reach 6 feet long. (The 12-foot sign contains two light sources.)

The bus lights, of course, don't just blare white light at drivers and pedestrians. Transparencies emblazoned with advertisements are placed on top of the sheets, thereby making the ordinary bus advertisement pop.

Photos: CeeLite's bendable, durable lights

"I want to light surfaces that aren't lit today. I want to light floors. I want to light floorboards," Mike Binder, senior vice president of business development, said during a presentation at the ThinkGreen conference here this week. "I have the ability to light objects with the objects themselves."

And there are a lot of surfaces that can be exploited, he asserted. Recently, Binder spent a weekend in Las Vegas, where he visited 120 restaurants by himself to check out the market potential. There's a lot of unadorned real space, he said. "Self-illumination is a massive untapped market."

CeeLite's signs are powered by a light-emitting capacitor, or LEC. LECs effectively store energy like standard capacitors, then release it into a substrate sprinkled with phosphors, which emit light when a current is applied. Different researchers and companies have worked on LECs and similar electroluminescent products for years, but the results weren't great. The products wore out over time or were relatively small.

"We figured out what makes EL (electroluminescence) fail," Binder said.

CeeLite's LEC, embedded between two polymer layers, is plugged into a power source. The company currently uses fresh plastic but is working on a way to use recycled plastic. Ideally, companies like Coca-Cola could make signs out of their old bottles.

From a functional standpoint, LECs are similar to organic light-emitting diodes. OLEDs, though, tend to be relatively small. Sony has released an 11-inch TV with an OLED screen, but the biggest customers for OLEDs right now are cell phone makers.

OLED makers like Universal Display, however, are also trying to get into the lighting market, where they say they'll be in a few years. They have also worked on the durability of their products, which they claim can last 20,000 hours.

One of the more novel OLEDs, from Universal Display, is a transparent piece of plastic that can serve as a window. Humans can see through it, but when a current is applied, it emits light.

Binder further added that CeeLite's signs are fairly durable. The signs can endure the pressure of power washers, which can spray water at several hundred pounds per square inch. To demonstrate, he also grabbed one of the company's lights, bent it several times and then jumped on it. It stayed lit.

Executives from hedge funds and private-equity firms gathered around to give him their cards.

See more CNET content tagged:
organic light-emitting diode, capacitor, sign, polymer, sheet

Add a Comment (Log in or register) 5 comments
Pixels everywhere
by t8 December 6, 2007 12:35 PM PST
This fits with the vision of pixels everywhere and web ads being displayed through them.

The World becomes the Web and this also provides for companies like Google a huge opportunity.

Tiles made of pixels, pixtiles if you will.
Reply to this comment
Nice product. Too bad it's not a little thinner.
by Mergatroid Mania December 6, 2007 3:36 PM PST
If they could thin this product down, it could be used as a backlight in LCD monitors.

If they could thin it down a little more they could use it to repair LCD monitors or TVs that have had the backlights break down. 1/8" is a little thick for that, although removing a few of the dispersion layers from the panels might allow for enough room.

Just think of all the panels that could be rescued from the landfills...
Reply to this comment
Sheets-Of-Light
by spothannah December 7, 2007 5:38 AM PST
Cool!
Reply to this comment
color is very blue
by Harlan879 December 7, 2007 6:22 AM PST
A quick look at the specs for these things suggests that they're a long way from home lighting. Their color temperature is a very very cool bluish-white, 7500 K. (In comparison, the mid-day sun is a blue-white 6500 K, a flash is a cool white 5500 , and a standard lightbulb is an orange-yellow 2800 K.) Their web site also has no information about spectrum or color rendering index (CRI). It's likely that colors under this light would look cold and washed out. Best to keep it as advertising on the sides of buses until a few more breakthroughs...!
Reply to this comment
by ElectricRanch May 14, 2008 8:16 PM PDT
Reminds me of the movie Bladerunner, where every surface was an advertisement.

Does this use less electrictiy, last longer, have any unique value, besides the ability to jump up and down on it?
Reply to this comment
advertisement

Latest tech news headlines

RSS Feeds

Add headlines from CNET News to your homepage or feedreader.

More feeds available in our RSS feed index.

Markets

Market news, charts, SEC filings, and more

Related quotes

Dow Jones Industrials (3.31%) 270.00 8,419.09
S&P 500 (3.99%) 32.60 848.81
NASDAQ (3.70%) 51.73 1,449.80
CNET TECH (3.64%) 36.93 1,051.13
  Symbol Lookup
advertisement

Inside CNET News

Scroll Left Scroll Right